- Legend Control Panel
- Legend Services
- Domain Names
- Hosting
- Internet
- What is ADSL?
- ADSL with Linux
- Can I use two ADSL modems at once?
- Can you share the USB modem between 2 or more computers?
- Does it work with Linux?
- How does ADSL compare to a dial-up or leased line connection?
- How do I test the speed of my ADSL connection?
- How is ADSL different from a dial-up modem?
- Minimum requirements for an Internet connected Mac via USB ADSL
- Minimum requirements for a PC connecting to the Internet through USB ADSL
- Router Troubleshooting Information
- Should I use a modem or router?
- TCP/IP Settings for NAT (Private Addressing)
- TCP/IP Settings for No-NAT (Static IP / Routable IP)
- Tweaks for improved ADSL performance
- What are contention ratios?
- What are the line tests that BT conducts?
- What if my PC is not next to a telephone socket?
- What is a DSLAM?
- What is a splitter/micro-filter?
- What is G.DMT?
- What is NAT?
- What is PPPoA or PPPoE support?
- What is Rate Adaption (RADSL)?
- What is the activation procedure?
- Who is responsible for billing?
- Why do I need a firewall?
- Will I still need to pay for my telephone line rental and telephone calls?
- Will other BT services such as "Call Waiting" still work?
- Framestream
- Framestream Errors
- Databases
- General Settings
- Legend Host Migration
- Legend Mail Migration
Tweaks for improved ADSL performance
BT Wholesale recommends an MTU (Maximum Transmission Unit) setting of 1458 (bytes) and states that it is best suited to the performance of the broadband network. You may experience an improvement in performance for certain applications such as web browsing, FTP and peer-to-peer. The MTU defines the maximum size that a single piece of information ("packet") is allowed to be. It is important that MTU is not too large or too small because this can greatly reduce the performance of your ADSL line.
If you are experiencing slow throughput the Broadband Network Optimiser tool (developed by BT Wholesale) will enable any Broadband Customers using WINDOWS (Win 95, 98, ME, 2000 , XP and NT) to easily modify the MTU to 1458 bytes on the ADSL interface whether there is a USB modem or an Ethernet Network Interface Card. Early results have shown that if End Users utilise the tool it results in improved network performance for them.
BT Broadband Network Optimiser
Alternatively try:
Broadband Reports .com: Tweaks : Is your PC configured for broadband?
If your system is not running Windows 95, 98, ME, 2000, XP, or NT then DO NOT USE THE Broadband Network Optimiser. In these circumstances we suggest that you review how the MTU setting on your system can be changed to 1458 via one of the descriptions provided on the external website listed below;
MAC OS: http://www.broadbandreports.com/faq/allthingsmac/all#3743
UNIX: This is highly dependent on the operating system, refer to supplier websites for details.
Disclaimer: Making modifications to the system registry or using this software is performed at your own risk. If you do not understand the implications, or how to recover from registry changes, you should not attempt the steps outlined above.
